- アプリ : TouchCab for Andriod APK,iOS
- 開発元 : Mike Sutherland | Appサポート
TouchCab
You have a model railroad. You have an ECoS or ECoS2 digital command station from ESU, a Central Station from Märklin or a Lenz v3.6 command station. You also have an iPhone or an iPod touch from Apple and a wireless network connected to the command station.
Would you like to run your model railroad from the iPhone or iPod? You can – with TouchCab.
So what is TouchCab?
TouchCab is a handheld controller for your DCC (Digital Command Control) model railroad / railway / train set. With TouchCab you can follow your trains around your layout without having to worry about plugging and unplugging a wired device. You can throw switches/turnouts and set train routes as you move along.
Features:
– Control all the locomotives defined in the command station.
– Access up to 29 functions of each locomotive.
– Clear overview of the locomotive’s speed and state.
– Easily change the throttle from left- to right handed operation.
– Wireless network connection to the command station.
– Control all switches/turnouts and signals defined in the command station.
– Locomotives and accessories are listed alphabetically, regardless of their order in the command station lists.
Supported DCC command stations:
ECoS 50000 by ESU (v1.1.3 or higher)
ECoS 2 50200 by ESU (v3.2.0 or higher)
Central Station 60212 by Märklin (v2.0.4 or higher)
Lenz 23151 XpressNet Interface with Lenz v3.6 command stations LZV100 or LZ100
Requirements:
-Digital Model Railway with a compatible DCC Command Station
– Network connection to the command station
– Wireless connection to the iPhone or iPod Touch
Instructions:
– Tap the speed wedge in either side to speed up and slow down your trains
– Change speed gradually by dragging across the speed wedge
– Double-tap the halt button to halt all trains.
– Swipe the function buttons sideways to access locomotive functions above F7
– Switch between left and right hand operation from the options tab
– Control routes and turnouts from the turnouts tab
– Control signals and other accessories from the signals tab
Want to try before your buy?
Try TouchCab Free – a feature limited free version that is built on the same code base as TouchCab.